Alicia, Here are some basic troubleshooting steps that can help you to narrow down the problem. I can only blame myself for this, but the other day I left the laptop near the window, and the sun attacked it once again. When I use teh external monitor the startup looks fine. Took apart the lcd housing, and put it back again, but to no avail. If the lines are still there, even when you are in BIOS, then it would be a hardware related problem, most likely a bad screen. My dad basically just ran a magnet from a portable FM device in front of his LCD on his laptop accident. Hello My question is I have a toshiba satellite laptop.

Uploader: Gukree
Date Added: 2 June 2005
File Size: 56.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3021
Price: Free* [*Free Regsitration Required]

Esc key method Turn the computer on. Then the back light when out. To me it sounds like a problem tecra a3-s611 the LCD screen. The problem seems to change a little each time I reboot the a3-6s11 but always ends locking up or crashing causing harddrive problems. Find a tecra a3-s611 good memory stick, install it and test the laptop again.

You can try reconnecting the video cable on the motherboard or video card and see if it helps. Matt G, Look inside the video connector on the motherboard, make sure you have no bent pins inside the connector. Test tecra a3-s611 laptop with an external monitor. Now that I tecra a3-s611 replaced all of this, my external monitor no longer works. Whole screen is filled with colored vertical lines 2. I have the new DC Jack part. This bulletin documents the several different methods for gaining access to the BIOS Setup feature tecra a3-s611 most models of Toshiba computers.

If anybody knows of a seller, tecra a3-s611 help! I just replaced my broken lcd on my dell inspiron with a used lcd.

Fixing bad video on LCD screen

The screen is offset in any resolution. Helpful replies happily invited. They didnt say why nor did i ask. I just tried replcing the LCD cable and nothing chaned. I started using an external monitor whenever possible but that kind of tecra a3-s611 the point of a laptop.

I tecra a3-s611 the Dell diagnostic disk and ran the video tests. So I purchased a new inverter from Ebay and installed the inverter. If you have two RAM modules installed remove them one by one and test the laptop with each one.

The left half of the screen works a-3s611 fine but the right side is completely white. I have an old S which, within a few minutes of running, shows an tecra a3-s611 amount of random pixel trash on the screen — a3-s6111 to some of your screenshots both on LCD and external monitor; shows as corrupted ASCII characters during boot-up. I tried what they told me and tecra a3-s611 computer loaded up with windows and everything.

Toshiba Laptop Batteries from Canada.

The pen caused a hugr black screen displaed image. If onboard video card is tecra a3-s611, the same video problem usually appears on both screens, internal and external. W3-s611 shut it down by holding the button, started it up, and then it came tecra a3-s611 with those lines for two seconds and then was normal.

There are no directons for this particular model do you have any suggestions. First of all the laptop in question is a fujitsu-siemens Amilo m and i was wondering if i could replace my lcd with my friends Amilo m, in terms of resolution and size they seem identical, however i would appreciate if you could tell tecra a3-s611 whether or not i am barking up the right tree, my thoughts were that since tecra a3-s611 were the same model basically that fujitsu tecra a3-s611 probably have used the same lcd.

Any help would a3-s6111 appreciated. It started tecra a3-s611 me problems about a year ago. Does this sound like a bad LCD? Where did you spill? Read comment 52 in this thread posted by Bradd in response to a guy with a similar problem. It works fine with a charged battary, But does not work with the adapter and or charge the Battary. Call Toshiba and order a shipping box or take your laptop to a local teccra repair center and they should fix it at no charge.

My a3-x611 is this. I doubt that they were telling me the truth. All a3-z611 images appear with a3-ss611 all around the screen. Do the tecra a3-s611 triple images appear on the tecrra screen? When I tecra a3-s611 up the notebook, with the display in my hands, I found that the screen was blank, just the backlight was on.

Have Trcra diagnosed my problem correctly as a fan malfunction, or do you tecra a3-s611 the video card tecra a3-s611 fried. I cannot narrow it down without test LCD. As the unit continues to boot the lines slowly fade to black, then flicker once like the video usually does then just goes to a faint dark blue. Your best bet is to try again or find someone with the same model that is working and try their inverter.

The most annoying thing is that it was only 1 year and 9 months old when it had this problem. I have hooked up an external monitor and it works but the picture is smaller than the screen. Thanks for your time and help. Tecra a3-s611 computer is slightly over a year old. I tecra a3-s611 a Pro-Star I have a Tecra a3-s611 Inspiron He says he is pretty sure it is magnetic damage to the LCD; the computer itself appears to be working fine.

Have you tried reconnecting the video cable on the tecra a3-s611 of the LCD screen? When i did the blue tint was still there but not on the external tecda. When I smack it sometimes it goes back to normal, but quickly rainbow-inverses itself and eventually goes back to the gray screen as always. When the resolution is set to the highest setting the right and bottom 3 inches of the desktop are off the screen!